Your solution » ATTICCO

Use the calculator below to find the ATTICCO that fits your sloping wall

1 – 2 – 3 steps and you have selected your furniture!

Step 1: Find your ATTICCO

Enter the two measures of knee wall height (A) and angle of your sloping wall (B) into the two empty boxes below – preferably with decimals, if any. Then initiate calculation by pressing the button with the text “CALCULATE”.

Now all the possible solutions fitting your sloping wall will be presented below the input boxes.

In some cases the Freestanding Low and the Freestanding High will both fit your room and both solutions will then be presented as solutions for you.

Notice! In nearly all cases where a Freestanding version (high or low) is fitting you sloping wall, you can choose among alternative expressions as the furniture hight and the furnitur dept. The different furniture expressions are achieved by flexible furniture legs and extra depth of the delivered furniture. This flexibility of expression will appear below as a number of columns presenting the various heights and depths avaialble for your location.

Note! Check the furniture size (the measurements are shown in the table), so you feel comfortable with the size of the furniture in relation to the room!

From above calculation you know your ATTICCO specification, and you can continue and order your furniture – in Step 2. Or you can make a note about the ATTICCO specification found, using the mail system above to the left. Having the specification as note you can always come back and purchase your ATTICCO using the specification calculated.

Step 2: Confirm the FURNITURE variant and select width!

On the basis of the furniture variants fitting your sloping wall, shown and listed ABOVE, please confirm the variant you want, in the purchasing system BELOW.

Step 3: Confirm your choice “Freestanding Low“.

(Please note: Freestanding Furniture Low can be adapted to the wall with either a pointed or vertical side plate).

At the product page you choose the number of units you want to interconnect lengthweise. Alternative sizes:

83 cm: Solo (1 Corpus)
123 cm: Solo Plus (1½ Corpus)
163 cm: Duo (2 Corpus)
203 cm: Duo Plus (2½ Corpus)
243 cm: Trio (3 Corpus)
283 cm: Trio Plus (3½ Corpus)
323 cm: Quattro (4 Corpus)

When you have chosen between size, next step will be for you to choose between Dresser, Cabinet and Shelving Unit. Having made all these selections, the furniture specifications and price will appear!

83 cm 123 cm 163 cm 203 cm 243 cm 283 cm 323 cm

REMEMBER:

All prices are shown in Danish Krones and with 25% Danish VAT. Insert (at check out) your Country- & Postcode for getting your price in you currency.

Note: If your in doubt, contact ATTICCO by Chat, email or telephone.

Step 3: Confirm your choice “Freestanding High“.

At the product page you choose the number of units you want to interconnect lengthweise. Alternative sizes:

83 cm: Solo (1 Corpus)
123 cm: Solo Plus (1½ Corpus) – from August 2021
163 cm: Duo (2 Corpus)
203 cm: Duo Plus (2½ Corpus) – from August 2021
243 cm: Trio (3 Corpus)
283 cm: Trio Plus (3½ Corpus) – from August 2021
323 cm: Quattro (4 Corpus)

When you have chosen size the next step will be for you to choose between Dresser, Cabinet and Shelving Unit. Having made all these selections, the furniture specifications and price will appear!

83 cm 123 cm 163 cm 203 cm 243 cm 283 cm 323 cm

REMEMBER:

All prices are shown in Danish Krones and with 25% Danish VAT. Insert (at check out) your Country- & Postcode for getting your price in you currency.

Note: If your in doubt, contact ATTICCO by Chat, email or telephone.

Step 3: Confirm your choice “Built-in Low“.

ATTICCO “Built-in variant LOW”, is prepared for assembly in width ….. indefinitely. The furniture boxes come with fitting bags for assembling your furniture. On the product page, you select the number of units you want to assemble.

80 cm: 1 element
160 cm: 2 elements
240 cm: 3 elements
320 cm: 4 elements
400 cm: 5 elements
etc.

On the product page you can choose between Dresser, Cabinet and Shelving Unit. Having made all these selections, the furniture specifications and price will appear!

Built-in Low

REMEMBER:

All prices are shown in Danish Krones and with 25% Danish VAT. Insert (at check out) your Country- & Postcode for getting your price in you currency.

Note: If your in doubt, contact ATTICCO by Chat, email or telephone.

Step 3: Confirm your choice “Built-in High“.

ATTICCO “Built-in variant High”, is prepared for assembly in width ….. indefinitely. The furniture boxes come with fitting bags for assembling your furniture. On the product page, you select the number of units you want to assemble.

80 cm: 1 element
160 cm: 2 elements
240 cm: 3 elements
320 cm: 4 elements
400 cm: 5 elements
etc.

On the product page you can choose between Dresser, Cabinet and Shelving Unit. Having made all these selections, the furniture specifications and price will appear!

Built-in High

REMEMBER:

All prices are shown in Danish Krones and with 25% Danish VAT. Insert (at check out) your Country- & Postcode for getting your price in you currency.

Note: If your in doubt, contact ATTICCO by Chat, email or telephone.

Step 3: Confirm your choice “Built-In Mini“.

ATTICCO “Built-in variant Mini”, is prepared for assembly in width ….. indefinitely. The furniture boxes come with fitting bags for assembling your furniture. On the product page, you select the number of units you want to assemble.

70 cm: 1 element
140 cm: 2 elements
210 cm: 3 elements
280 cm: 4 elements
350 cm: 5 elements
etc.

On the product page you find relevant specifications and prices!

Built-In MINI

REMEMBER:

All prices are shown in Danish Krones and with 25% Danish VAT. Insert (at check out) your Country- & Postcode for getting your price in you currency.

Note: If your in doubt, contact ATTICCO by Chat, email or telephone.

Guide to assembly instructions:

When the calculation tool has assigned the variant (Freestanding Furniture or Built-in Furniture) and the size (Low or High) that will fit your back wall, it will be seen from the tables to the right whether you may choose between more alternative furniture expressions (furniture height and depth). This option is only possible for Freestanding Furniture. Built-in Furniture will always be hidden by the knee wall.

When you have chosen furniture expression (height and depth), you get the option to email your choice to the email address. Then the necessary data will be ready for you when you are ready to assemble your furniture.

Alternatively, you must make this choice when assembling the furniture.