ATTICCO Built-in Furniture Mini is integrated behind an existing or new skunk wall. The furniture is delivered with a middle plate, 2 doors and 2 shelf plates. The furniture’s 2 doors are pulled into the furniture and are in front at the level of the furniture’s sides and intermediate plate. The geometry of the furniture allows for an easy and beautiful installation in the wall, and does not require any final covering.
The solution is aimed at rooms with low to medium-high skunks .
The furniture consists of 1 body, which applies to:
The ATTICCO Mini is 60.0 cm in height and 70.0 cm in width. The depth is 50.0 cm at the bottom plate and 14.0 cm at the top plate (outer dimension).
The body comes with 2 doors (56.4 x 32.1 cm) which are located in the two vertical compartments and so that the front of the door follows the front edge of the furniture’s sides and intermediate plate. The doors are opened via push-out brackets, so handles are not necessary.
The two shelf plates can be placed in 2 positions. Center location divides the closet space in height into 2 x 27.75 cm. High location gives 32.5 cm height in the lower compartment (provides space for A4 folders) and 23 cm height at the top.
The furniture is placed on a self-made plinth.
ATTICCO products are produced using the best MDF and HDF wood grades in the dimensions 16 mm for MDF and 3 mm for HDF. All surfaces are lacquered.
Only the best fittings and anchoring irons are used, which ensures easy assembly and subsequent easy operation and long service life. ATTICCO is manufactured by an FSC®-certified furniture manufacturer.
Note: Pay attention to whether there are special requirements for fire protection when breaking the skunk wall – especially in multi-storey buildings.