Frequently asked questions
Frequently asked questions
Choice of furniture
You must use the measurements of the skunk height (in cm) and the oblique angle (in degrees) where the furniture is to be placed (or built-in). You enter the 2 numbers (preferably with decimals) in ATTICCO’s calculation model: https://atticco.dk/da/koebsguide/din-losning/, which then calculates and presents which variants and sizes of furniture fit your back wall. There may well be several alternative furniture sizes to suit. If there is no furniture that fits 100%, it will appear from the calculation model.
The skunk height, measured in cm, is the vertical wall from the floor to where the sloping wall begins.
The angle of your sloping wall, measured in degrees, is angle ml. horizontally (your floor) and the sloping wall. A typical sloping wall is between 30 and 60 degrees. Read in detail about your survey and watch a video with an example of a survey. Finally, there is a link to an app for your smartphone where you can download a protractor for free.
A perfectly adapted piece of furniture is a piece of furniture that fits both the skunk wall and the sloping wall. To be able to ensure that there is a perfect fit between furniture and back wall, it is not possible to optionally choose ATTICCO variant. If, for example, you have a high skunk wall, you must either have a high free-standing piece of furniture or a (low) built-in piece of furniture. Conversely, if you have a sloping wall without a vertical skunk – where the sloping wall goes all the way down to the floor – then the high free-standing furniture will not fit at all – while the low free-standing furniture fits perfectly here. Therefore, you have to go past the calculation model to make sure that you get an ATTICCO that fits perfectly.
You contact ATTICCO via the chat on the website, via tel (23297947) or you send an email to kontakt@atticco.dk and state your measurements for skunk height, oblique angle and the width of the room and which furniture variant you are interested in. Then we will in dialogue with you present your options. We offer you special plates that can support a standard solution.
You contact ATTICCO via the chat on the website, via tel. (+45 23297947) or you send an email to kontakt@atticco.dk and state your measurements for skunk height, oblique angle and the width of the room. Then we will in dialogue look at which special solutions may be interesting to you. We offer you special plates for this purpose. We can also draw for you how your special furniture should be adapted.
The free-standing furniture can be assembled and adjusted flexibly in height and depth, thereby expressing itself differently in the room. The associated furniture legs are flexible in height ml. 7 and 25 cm and the same applies to the furniture side panels that are flexible in depth ml. 60 and 100 cm. With varying height of the furniture legs, you can pull the furniture in under the sloping wall (low legs / reduced depth) or push the furniture out into the room (high legs / increased depth).
You must first make this decision when assembling the furniture.
Your options for adjusting the free-standing furniture appear when you enter your skunk height and angle on the sloping wall. In the table next to the furniture picture, you see varying height of furniture legs and associated furniture height and furniture depth.
When you order a low resp. high free-standing furniture, you always receive a piece of furniture with the same body in resp. low and high version. It is the flexible furniture legs (height) and side panels (depth) that ensure that the delivered furniture is flexible and fits your and more than 100,000 different other sloping wall combinations. This is the core of the patented solution behind ATTICCO. Because the flexibility is laid in furniture legs and side panels that you adapt yourself, we can
deliver to you from day to day and you must first decide your furniture expression when assembling the furniture.
- Low free-standing furniture with pointed rear edge (low body),
- Low free-standing furniture with straight rear edge (low body)
- High free-standing furniture with straight rear edge (high body)
- Mini Built-in furniture
- Low built-in furniture (low body)
- Highly built-in furniture (high body)
See corpus measurements at link: https://atticco.dk/da/vejledninger/
ATTICCO ALWAYS uses a standard body that is 60 cm in depth (equivalent to a kitchen cabinet) and in height: 70.5 cm in LOW and 105 cm in HIGH. This means that regardless of whether you assemble a piece of furniture that has side panels of 62 cm or 98 cm in depth, the same body is used and thus the same (functional) space for bookcase, cabinet and / or drawers. The shelf shelves have a depth of up to 60 cm and the drawers a depth of up to 55 cm.
Is it not a waste of space under the sloping wall that the drawer is 55 cm and not 85 cm for example? Yes and no. Yes because you do not use the space and then it is by definition a waste. And no, because a drawer up to 95 cm x 75 cm will work very poorly. The drawer will be very heavy and the bottom will very easily go out of the drawer. In addition, the price of the furniture with individual dimensions will be significantly higher than the price today, as each piece of furniture must be adapted to each individual customer.
ATTICCO offers the sale of extra panels, giving you the same look on the built-in and free-standing furniture. Contact ATTICCO and get a concrete offer and drawings on the extra plates you need.
Vejledninger
ATTICCO uses a subcontractor who is fully flexible in terms of delivery in optional colors and veneers. The quality is top notch but in terms of handheld single production when we talk about special surfaces there is extra price and delivery time.
The ATTICCO piece of furniture is designed so that you can always choose between a piece of furniture that is equipped as a bookcase, cupboard or as a drawer piece of furniture. Once you have chosen the variant and width, you must choose which functions it should have: Bookcase, cabinet and / or drawer.
A free-standing piece of furniture is delivered in 8 widths consisting of half and whole body. It can be ordered as Solo½ (43 cm), Solo (83 cm), Solo Plus (123 cm), Duo (163 cm) …… .. Quattro (323 cm). These 8 widths all come with an unbroken top plate in full width. Built-in furniture can be built together indefinitely and with a width per unit of 70 cm for MINI and 40 or 80 cm for LOW and HIGH.
To enjoy a barbell, it requires a certain ground clearance. Clearance is not sufficient in the low furniture. Conversely in the tall piece of furniture there is more than 90 cm from the top of the hanger bar to the bottom of the closet, which will be sufficient for most jackets, shirts etc.
ATTICCO is offered with the functions shelf, cabinet and drawer. For this you can buy a hanger system. Bookcase and cupboard are NOT sold without shelf plates. If you choose to mount the hanger system, you will in many situations be able to use one set of shelves, as there are extra holes made for this shelf set at the bottom of the cabinet.
Delivery
ATTICCO furniture is always delivered non-assembled and in flat boxes. This means that the furniture must be assembled on site for installation / installation. Conversely, it has enabled significantly lower prices and a significantly easier transport and application to the roof. All free-standing and built-in furniture solutions are delivered on pallets, which supports damage-free delivery from ATTICCO to the customer.
The maximum package weight is 30 kg. The longest package is 330 x 40 x 5 cm and the largest package is 105 x 110 x 5 cm. A free-standing piece of furniture as a duo low with Drawer / cabinet consists of 10 packages and weighs approx. 100 kg. A free-standing Quattro High with drawers consists of 22 packages and weighs just under 300 kg.
The shipping costs reflect the pattern in the costs that are on the different furniture variants. The actual freight is even higher than what is invoiced to the customers. ATTICCO has chosen to cover part of the shipping costs. If you buy several pieces of furniture at once, you get an extra quantity discount, as the freight can be locked at a maximum rate.
ATTICCO strives to be a stock leader in the complete range. This means that ATTICCO can typically ship the day after order receipt and for Danish customers, it then delivers day 2 after ordering. Foreign customers should expect 3-5 days delivery
ATTICCO NEVER initiates delivery without the delivery date being agreed with the customer.
Every carrier must organize their routes according to the shipments they receive. As shipments vary from day to day, it is impossible for them to provide a fixed delivery time.
Only a few Danish distributors deliver on pallets to end customers. None of these have delivery on weekends and holidays.
Danske Fragtmænd offers to bring your packages to your destination. Payment is made per initial 10 minutes of service (approx. DKK 125) and then per 5 min. As a customer, you must keep track of the time yourself. Contact ATTICCO to book this service.
ATTICCO has a warehouse in Central Jutland and by appointment you can pick up your ordered goods here. It is open for collection ml. at 07 and 15 Monday to Thursday. Collection only by written agreement.
Pick-up takes place from the address Højgårdsvej 25, Thorning, 8620 Kjellerup. The goods are delivered from Port 4. When ordering, a card with route directions to port 4 is included.
Yes, as stated in the terms and conditions, you can return purchased ATTICCO furniture. Please read the terms and conditions for trading exactly how to proceed. https://atticco.dk/da/handelsbetingelser-og-garanti/
ATTICCO will set off direct costs for checking packages that have been opened (max. DKK 100 per package) and an extra rate for furniture packages that have also been collected (Max DKK 300 per package). The payment covers losses on resale at a reduced price. ATTICCO is happy to assist with ordering freight.
Assembly
Everything is relative. But we do not think it is difficult – not even the many customers that ATTICCO has served so far. But a large piece of furniture up to 300 kg naturally takes time to assemble. A customer has described it as building with LEGO. If you follow the assembly instructions step by step, the task is probably big but NOT difficult.
ATTICCO does NOT offer collection of furniture. It is our experience that a good Handyman from the local area is a good alternative to assembling the furniture yourself. As a customer, you are always welcome to contact ATTICCO for good advice if you encounter a problem during the assembly. Write a email toService@atticco.dk
or give us a call (+45 23297947) while you have the problem.
As the furniture legs are fully flexible from 70 to 250 mm, there are all options for adjusting the furniture legs.
If it is the skunk height that differs, the adaptation of the side plates must be based on the measurements from the lowest skunk. If it is the floor that is skewed, you can adjust the furniture legs, which are fully flexible from 70 to 250 mm. Is it in the back wall the skew occurs it is a little more tricky. In general, ATTICCO recommends that both side plates are cut to the same size and you use the 2 attached edging strips on resp. 15 and 45 mm to record any. air at the side plates. If the skew is more than 25 mm, it can be possible with 2 non-uniform side plates – please contact ATTICCO for specific guidance. For minor deviations, ATTICCO recommends that you use the edging and at the same time accept whether there is 5 – 15 mm of air ml. furniture and wall. On traditional free-standing furniture, it is not unusual to have up to 50-100 mm of air ☺.
If the skunk height and inclination angle vary on 2 opposite inclined walls, you will NOT automatically be recommended the same measurement for leg height and depth of side panels on the 2 pieces of furniture. There can be up to +/- 1 cm at the leg height. At a certain distance ml. the 2 furniture, however, it is doubtful if anyone notices this. However, if your furniture height is absolutely crucial, you can choose to adjust the leg height of the lowest piece of furniture. The consequence is that the furniture is pushed out from the back wall and a smaller air space is created ml. side plate and skunk wall. This air space can either be accepted or covered by the supplied edging.
Yes, you can – but it is important that the furniture is not moved as a single unit, but divided into corpus units. Ie. a trio is moved by removing the top plate (not necessarily the side plates) and then the total of 8 assembly screws which hold the 3 bodies together. A Trio is then moved as three pieces of furniture.
When the Trio has to be reassembled – perhaps in a new place – it is important to make sure that the furniture is plumb / wadded and that it is tightened well before the top plate is reassembled.
Maintenance
ATTICCO has fully lacquered panels. We recommend wiping the surfaces with a dry or slightly damp cloth. You can possibly use water with an ordinary. solution of detergent.
ATTICCO furniture is 100% mdf – no plastic or chipboard. The choice of mdf allows you to choose at any time to have, for example, fronts, side plates and top plates varnished in a new color.
